1 emboss tape krd connector 2.0mm pitch/disconnectable insulation displacement connectors ? this 2.0mm pitch insulation displacement connector is another version of the nrd connector for printed circuit boards. the krd connector allows daisy chaining and is very useful in simplifying connection systems in electronic equipment. ?daisy chain connection ?twin slot insulation displacement section ?distortion resistant construction ?interchangeability ?low profile design - a mere 9.0mm high from the pc board surface specifications ?current rating: 1.0a ac, dc (awg #26) ?voltage rating: 100v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/10m ? max. after environmental testing/20m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 800v ac/minute ?applicable wire: ul1571, ul1061 (contact jst for details regarding other ul styles.) awg #28, #26 conductor/7 strands, tin-coated insulation o.d./0.9 to 1.0mm ?applicable pc board thickness: 0.8 to 1.6mm * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc boards and piercing method. if pc boards made of hard material are used, the hole dimensions should be larger. the dimensions above should serve as a guideline. contact jst for details. through-hole type pc board layout (viewed from soldering side) and assembly layout top entry type ? ? n b y n j o ? ? ? n j o & |